Getting Started
From PBXes
| Revision as of 00:21, 24 July 2010 (edit) kolyays (Talk | contribs) (→SIP phones) ← Previous diff |
Revision as of 20:35, 6 August 2010 (edit) (undo) i-p-tel (Talk | contribs) m (Änderungen von kolyays (Beiträge) rückgängig gemacht und letzte Version von i-p-tel wiederhergestellt) Next diff → |
||
| Line 25: | Line 25: | ||
| {| border="1" cellspacing="0" cellpadding="3" | {| border="1" cellspacing="0" cellpadding="3" | ||
| - | | Login || < | + | | Login || <account name>-<extension no.> |
| e.g. pamsoft-200 | e.g. pamsoft-200 | ||
| |- | |- | ||
| - | | Password || < | + | | Password || <extension password> |
| |- | |- | ||
| | Domain/Realm/Server || pbxes.org | | Domain/Realm/Server || pbxes.org | ||
Revision as of 20:35, 6 August 2010
Contents |
Definitions
Extensions
An extension is just the definition of a classic (POTS) or SIP (VOIP) telephone line/number. Inbound calls can be routed to either of these two extensions types using inbound routes. Classic extensions will be dialed using the defined outbound route definitions. SIP extensions are normally used to register SIP devices to, like SIP phones, softphones or ADSL modems having SIP capabilities. Unlike classic extensions, SIP extensions can be used to place calls too.
Trunks
Trunks are definitions of the SIP providers you want to use for receiving inbound calls and/or placing outbound calls. Inbound calls are routed to extensions using inbound routes and outbound calls are routed to a trunk using the outbound routes. For receiving inbound calls it is necessary to register to the SIP provider.
Adding extensions
Select "Extensions" from the menu to add two kinds of extensions. Existing phone numbers attached to PSTN lines, as well as IP phones, ATAs and soft-clients to your PBXes account. Extension numbers may be 3 or 4 digits. Avoid using 2 digit extensions, since they may conflict with Ring group numbers.
Classical extensions
Classical extensions are used to reach PSTN numbers, which by definition cannot be reached via SIP URIs. These can be existing land-lines in the office and home or mobile phones. Just enter an extension number 3 or 4 digits, a name and the telephone number of the land-line.
Classical extensions can only be called by using a trunk, so set an Outbound route appropriately in order to reach them.
SIP phones
In addition to extension number and name enter a password. The following parameters are assigned to the SIP phone to register with the PBX:
| Login | <account name>-<extension no.>
e.g. pamsoft-200 |
| Password | <extension password> |
| Domain/Realm/Server | pbxes.org |
| Registration Interval | Fixed IPs: 1 hour
Dynamic IPs or with issues: 2 minutes |
| Remote Port | 5060 |
| Alternative Ports | 53, 69, 80, 135, 161, 443, 500, 1433, 1701, 1812, 3389, 4500, 5061, 5900, 16999, 26999 and
36999 (recommended) Note: Because of the DNS entries for pbxes.org your device may be selecting port 5060 automatically. If you want to use an alternative port enter 188.40.65.148 as SIP server. |
To verify the settings dial *43 on the IP phone to perform an echo test. In case the key tones are not recognized during a call, try setting a different "dtmfmode". The allowed values are rfc2833, inband, info and auto.
The users may now sign in to listen to their voicemail or display the call details which pertain to their extension only. Provide them with the following info:
| Login | <account name>-<extension no.> |
| Password | <voicemail pin> (4 digits) |
Adding trunks
Next select Trunks from the menu to enter the SIP credentials provided by your ITSP, so your PBXes can communicate with the PSTN world.
SIP providers supply both the incoming (DIDs) and the outgoing trunk lines to your PBXes. Select providers which use the SIP protocol and usually require a username and password to access their service. Before going on to the next steps test the SIP account for outgoing calls from your PC with a soft-phone.
Holders of a Premium or PRO Account can see our recommendation of tested SIP providers on the Trunks page.
SIP providers may supply a phone number (DID) through which your PBXes account can be reached on. Depending on the provider this may be a local number in a particular country. In certain countries it is not yet possible to port a PSTN number to another provider (LNP). If you want to keep your PSTN number and integrate it with your PBXes account, consider connecting and configuring a VoIP gateway for your existing PSTN line. The calls to your existing landline can also be forwarded to your SIP DID.
Choosing routes
To get inbound and outbound calls working properly, you have to add at least an Inbound Route and an Outbound Route.
When entering your first inbound route please leave the fields Trunk and Caller ID Number blank to create a general rule.
If there are several trunks you may choose the destination numbers to select the trunks. Outbound routes are processed from top to bottom. Routes can be reordered by clicking on the small arrows next to the route names. When all the changes are finished, clicking on the red bar puts the changes into effect.
Premium and PRO Accounts also allow to choose a sequence of trunks for having a backup if a trunk is busy or gets offline.
